PL composite sand making machine

  • 产品详情
  • 产品参数

Product Introduction


The composite sand making machine is a new type of fine crushing and coarse grinding product developed by optimizing the main technical parameters based on the technology of similar crushers at home and abroad. It is mainly used for crushing cement raw materials and clinker in medium-sized cement plants, providing an ideal fine crushing equipment for cement plant technological transformation or new cement production lines. It is also suitable for crushing other medium hard ores such as iron ore, sandstone, gypsum, blast furnace slag, coal gangue, and lump coal. The composite sand making machine has the characteristics of high crushing ratio, low energy consumption, stable operation, simple structure, and convenient operation and maintenance.


working principle


The material falls vertically into the high-speed rotating impeller from the upper part of the machine, and under the action of high-speed centrifugal force, it collides and crushes at high speed with another part of the material that is divided in an umbrella shape around the impeller. After colliding with each other, the material will form a vortex between the impeller and the casing and collide and rub against each other multiple times to crush it. It is discharged directly from the lower part, forming a closed loop for multiple cycles, and controlled by the screening equipment to achieve the required particle size of the finished product.


Job characteristics


(1) Simple and reasonable structure, low operating cost. By utilizing the principles of stone to stone, stone to iron, and joint, there is minimal wear and tear.


(2) High crushing rate and energy-saving.


(3) It has the functions of sand making, fine crushing, and coarse grinding.


(4) Less affected by the moisture content of the material, with a moisture content of up to 8%.


(5) The working noise is below 75 decibels (dB level), and there is less dust pollution.


(6) Suitable for crushing medium hard and extra hard materials


(7) The product is cubic in shape, with a high packing density and minimal iron pollution.


(8) The self lining of the impeller has minimal wear and is easy to maintain.


(9) The spindle rotor can rotate left and right, reducing the frequency of replacing vulnerable parts.


technical parameter


2PL复合式制砂机.jpg

brand
Sichuan Guoding Machinery
type
制砂机
specifications
standard
colour
yellow
Model specifications
standard
Home
Customer service